|By Greg Schulz||
|January 17, 2013 08:00 AM EST||
This is the third in a multi-part series of posts (read first post here and second post here) looking at what else EMC announced today in addition to an enhanced VMAX 10K and dispelling the myth that large storage arrays are dead (or at least for now).
In addition to the VMAX 10K specific updates, EMC also announced the release of a new version of their Enginuity storage software (firmware, storage operating system) version 1578. Enginuity 1578 is support across all VMAX platforms and features the following:
- Replication enhancements include TimeFinder clone refresh, restore and four site SRDF for the VMAX 10K, along with think or thin support. This capability enables functionality across VMAX 10K, 40K or 20K using synchronous or asynchronous and extends earlier 3 site to 4 site and mix modes. Note that larger VMAX systems had the extended replication feature support with VMAX 10K now on par with those. Note that the VMAX can be enhanced with VPLEX in front of storage systems (local or wide area, in region HA and out of region DR) and RecoverPoint behind the systems supporting bi-synchronous (two-way), synchronous and asynchronous data protection (CDP, replication, snapshots).
- Unisphere for VMAX 1.5 manages DMX along with VMware VAAI UNMAP and space reclamation, block zero and hardware clone enhancements, IPV6, Microsoft Server 2012 support and VFCache 1.5.
- Support for mix of 2.5 inch and 3.5 inch DAEs (disk array enclosures) along with new SAS drive support (high-performance and high-capacity, and various flash-based SSD or EFD).
- The addition of a fourth dynamic tier within FAST for supporting third-party virtualized storage, along with compression of in-active, cold or stale data (manual or automatic) with 2 to 1 data footprint reduction (DFR) ratio. Note that EMC was one of early vendors to put compression into its storage systems on a block LUN basis in the CLARiiON (now VNX) along with NetApp and IBM (via their Storwize acquisition). The new fourth tier also means that third-party storage does not have to be the lowest tier in terms of performance or functionality.
- Federated Tiered Storage (FTS) is now available on all EMC block storage systems including those with third-party storage attached in virtualization mode (e.g. VMAX). In addition to supporting tiering across its own products, and those of other vendors that have been virtualized when attached to a VMAX, ANSI T10 Data Integrity Field (DIF) is also supported. Read more about T10 DIF here, and here.
- Front-end performance enhancements with host I/O limits (Quality of Service or QoS) for multi tenant and cloud environments to balance or prioritize IO across ports and users. This feature can balance based on thresholds for IOPS, bandwidth or both from the VMAX. Note that this feature is independent of any operating system based tool, utility, pathing driver or feature such as VMware DRS and Storage I/O control. Storage groups are created and mapped to specific host ports on the VMAX with the QoS performance thresholds applied to meet specific service level requirements or objectives.
For discussion (or entertainment) purpose, how about the question of if Enginuity qualifies or can be considered as a storage hypervisors (or storage virtualization or virtual storage)? After all, the VMAX is now capable of having third-party storage from other vendors attached to it, something that HDS has done for many years now. For those who feel a storage hypervisor, virtual storage or storage virtualization requires software running on Intel or other commodity based processors, guess what the VMAX uses for CPU processors (granted, you can't simply download Enginuity software and run on a Dell, HP, IBM, Oracle or SuperMicro server).
I am guessing some of EMC competitors and their surrogates or others who like to play the storage hypervisor card game will be quick to tell you it is not based on various reasons or product comparisons, however you be the judge.
Back to the question of if, traditional high-end storage arrays are dead or dying (from part one in this series).
IMHO as mentioned not yet.
Granted like other technologies that have been declared dead or dying yet still in use (technology zombies), they continue to be enhanced, finding new customers, or existing customers using them in new ways, their roles are evolving, this still alive.
For some environments as has been the case over the past decade or so, there will be a continued migration from large legacy enterprise class storage systems to midrange or modular storage arrays with a mix of SSD and HDD. Thus, watch out for having a death grip not letting go of the past, while being careful about flying blind into the future. Do not be scared, be ready, do your homework with clouds, virtualization and traditional physical resources.
Likewise, there will be the continued migration for some from traditional mid-range class storage arrays to all flash-based appliances. Yet others will continue to leverage all the above in different roles aligned to where their specific features best serve the applications and needs of an organization.
In the case of high-end storage systems such as EMC VMAX (aka formerly known as DMX and Symmetrix before that) based on its Enginuity software, the hardware platforms will continue to evolve as will the software functionality. This means that these systems will evolve to handling more workloads, as well as moving into new environments from service providers to mid-range organizations where the systems were before out of their reach.
Smaller environments have grown larger as have their needs for storage systems while higher end solutions have scaled down to meet needs in different markets. What this means is a convergence of where smaller environments have bigger data storage needs and can afford the capabilities of scaled down or Right-sized storage systems such as the VMAX 10K.
Thus while some of the high-end systems may fade away faster than others, for those that continue to evolve being able to move into different adjacent markets or usage scenarios, they will be around for some time, at least in some environments.
Avoid confusing what is new and cool falling under industry adoption vs. what is productive and practical for customer deployment. Systems like the VMAX 10K are not for all environments or applications; however, for those who are open to exploring alternative solutions and approaches, it could open new opportunities.
If there is a high-end storage system platform (e.g. Enginuity) that continues to evolve, re-invent itself in terms of moving into or finding new uses and markets the EMC VMAX would be at or near the top of such list. For the other vendors of high-end storage system that are also evolving, you can have an Atta boy or Atta girl as well to make you feel better, loved and not left out or off of such list. ;)
Ok, nuff said for now.
Disclosure: EMC is not a StorageIO client; however, they have been in the past directly and via acquisitions that they have done. I am however a customer of EMC via my Iomega IX4 NAS (I never did get the IX2 that I supposedly won at EMCworld ;) ) that I bought on Amazon.com and indirectly via VMware products that I have, oh, and they did sent me a copy of the new book Human Face of Big Data (read more here).
All Comments, (C) and (TM) belong to their owners/posters, Other content (C) Copyright 2006-2013 StorageIO All Rights Reserved
SYS-CON Events announced today that Roundee / LinearHub will exhibit at the WebRTC Summit at @ThingsExpo, which will take place on November 1–3, 2016, at the Santa Clara Convention Center in Santa Clara, CA. LinearHub provides Roundee Service, a smart platform for enterprise video conferencing with enhanced features such as automatic recording and transcription service. Slack users can integrate Roundee to their team via Slack’s App Directory, and '/roundee' command lets your video conference ...
Sep. 29, 2016 05:45 AM EDT Reads: 1,500
Digital transformation is too big and important for our future success to not understand the rules that apply to it. The first three rules for winning in this age of hyper-digital transformation are: Advantages in speed, analytics and operational tempos must be captured by implementing an optimized information logistics system (OILS) Real-time operational tempos (IT, people and business processes) must be achieved Businesses that can "analyze data and act and with speed" will dominate those t...
Sep. 29, 2016 05:15 AM EDT Reads: 1,242
IoT is fundamentally transforming the auto industry, turning the vehicle into a hub for connected services, including safety, infotainment and usage-based insurance. Auto manufacturers – and businesses across all verticals – have built an entire ecosystem around the Connected Car, creating new customer touch points and revenue streams. In his session at @ThingsExpo, Macario Namie, Head of IoT Strategy at Cisco Jasper, will share real-world examples of how IoT transforms the car from a static p...
Sep. 29, 2016 05:00 AM EDT Reads: 1,634
Internet of @ThingsExpo, taking place November 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA, is co-located with the 19th International Cloud Expo and will feature technical sessions from a rock star conference faculty and the leading industry players in the world and ThingsExpo Silicon Valley Call for Papers is now open.
Sep. 29, 2016 04:30 AM EDT Reads: 4,677
The Transparent Cloud-computing Consortium (abbreviation: T-Cloud Consortium) will conduct research activities into changes in the computing model as a result of collaboration between "device" and "cloud" and the creation of new value and markets through organic data processing High speed and high quality networks, and dramatic improvements in computer processing capabilities, have greatly changed the nature of applications and made the storing and processing of data on the network commonplace.
Sep. 29, 2016 04:00 AM EDT Reads: 1,211
Almost two-thirds of companies either have or soon will have IoT as the backbone of their business in 2016. However, IoT is far more complex than most firms expected. How can you not get trapped in the pitfalls? In his session at @ThingsExpo, Tony Shan, a renowned visionary and thought leader, will introduce a holistic method of IoTification, which is the process of IoTifying the existing technology and business models to adopt and leverage IoT. He will drill down to the components in this fra...
Sep. 29, 2016 04:00 AM EDT Reads: 1,813
SYS-CON Events announced today that ReadyTalk, a leading provider of online conferencing and webinar services, has been named Vendor Presentation Sponsor at the 19th International Cloud Expo, which will take place on November 1–3, 2016, at the Santa Clara Convention Center in Santa Clara, CA. ReadyTalk delivers audio and web conferencing services that inspire collaboration and enable the Future of Work for today’s increasingly digital and mobile workforce. By combining intuitive, innovative tec...
Sep. 29, 2016 03:30 AM EDT Reads: 3,033
I'm a lonely sensor. I spend all day telling the world how I'm feeling, but none of the other sensors seem to care. I want to be connected. I want to build relationships with other sensors to be more useful for my human. I want my human to understand that when my friends next door are too hot for a while, I'll soon be flaming. And when all my friends go outside without me, I may be left behind. Don't just log my data; use the relationship graph. In his session at @ThingsExpo, Ryan Boyd, Engi...
Sep. 29, 2016 03:30 AM EDT Reads: 1,377
IoT offers a value of almost $4 trillion to the manufacturing industry through platforms that can improve margins, optimize operations & drive high performance work teams. By using IoT technologies as a foundation, manufacturing customers are integrating worker safety with manufacturing systems, driving deep collaboration and utilizing analytics to exponentially increased per-unit margins. However, as Benoit Lheureux, the VP for Research at Gartner points out, “IoT project implementers often ...
Sep. 29, 2016 03:15 AM EDT Reads: 3,578
SYS-CON Events announced today that Pulzze Systems will exhibit at the 19th International Cloud Expo, which will take place on November 1–3, 2016, at the Santa Clara Convention Center in Santa Clara, CA. Pulzze Systems, Inc. provides infrastructure products for the Internet of Things to enable any connected device and system to carry out matched operations without programming. For more information, visit http://www.pulzzesystems.com.
Sep. 29, 2016 03:15 AM EDT Reads: 1,906
There is growing need for data-driven applications and the need for digital platforms to build these apps. In his session at 19th Cloud Expo, Muddu Sudhakar, VP and GM of Security & IoT at Splunk, will cover different PaaS solutions and Big Data platforms that are available to build applications. In addition, AI and machine learning are creating new requirements that developers need in the building of next-gen apps. The next-generation digital platforms have some of the past platform needs a...
Sep. 29, 2016 03:00 AM EDT Reads: 1,877
If you’re responsible for an application that depends on the data or functionality of various IoT endpoints – either sensors or devices – your brand reputation depends on the security, reliability, and compliance of its many integrated parts. If your application fails to deliver the expected business results, your customers and partners won't care if that failure stems from the code you developed or from a component that you integrated. What can you do to ensure that the endpoints work as expect...
Sep. 29, 2016 02:45 AM EDT Reads: 1,718
As ridesharing competitors and enhanced services increase, notable changes are occurring in the transportation model. Despite the cost-effective means and flexibility of ridesharing, both drivers and users will need to be aware of the connected environment and how it will impact the ridesharing experience. In his session at @ThingsExpo, Timothy Evavold, Executive Director Automotive at Covisint, will discuss key challenges and solutions to powering a ride sharing and/or multimodal model in the a...
Sep. 29, 2016 02:30 AM EDT Reads: 530
Is your aging software platform suffering from technical debt while the market changes and demands new solutions at a faster clip? It’s a bold move, but you might consider walking away from your core platform and starting fresh. ReadyTalk did exactly that. In his General Session at 19th Cloud Expo, Michael Chambliss, Head of Engineering at ReadyTalk, will discuss why and how ReadyTalk diverted from healthy revenue and over a decade of audio conferencing product development to start an innovati...
Sep. 29, 2016 02:30 AM EDT Reads: 2,178
WebRTC adoption has generated a wave of creative uses of communications and collaboration through websites, sales apps, customer care and business applications. As WebRTC has become more mainstream it has evolved to use cases beyond the original peer-to-peer case, which has led to a repeating requirement for interoperability with existing infrastructures. In his session at @ThingsExpo, Graham Holt, Executive Vice President of Daitan Group, will cover implementation examples that have enabled ea...
Sep. 29, 2016 02:00 AM EDT Reads: 1,594
SYS-CON Events announced today that Numerex Corp, a leading provider of managed enterprise solutions enabling the Internet of Things (IoT), will exhibit at the 19th International Cloud Expo | @ThingsExpo, which will take place on November 1–3, 2016, at the Santa Clara Convention Center in Santa Clara, CA. Numerex Corp. (NASDAQ:NMRX) is a leading provider of managed enterprise solutions enabling the Internet of Things (IoT). The Company's solutions produce new revenue streams or create operating...
Sep. 29, 2016 01:45 AM EDT Reads: 2,058
Fifty billion connected devices and still no winning protocols standards. HTTP, WebSockets, MQTT, and CoAP seem to be leading in the IoT protocol race at the moment but many more protocols are getting introduced on a regular basis. Each protocol has its pros and cons depending on the nature of the communications. Does there really need to be only one protocol to rule them all? Of course not. In his session at @ThingsExpo, Chris Matthieu, co-founder and CTO of Octoblu, walk you through how Oct...
Sep. 29, 2016 01:00 AM EDT Reads: 2,311
"My role is working with customers, helping them go through this digital transformation. I spend a lot of time talking to banks, big industries, manufacturers working through how they are integrating and transforming their IT platforms and moving them forward," explained William Morrish, General Manager Product Sales at Interoute, in this SYS-CON.tv interview at 18th Cloud Expo, held June 7-9, 2016, at the Javits Center in New York City, NY.
Sep. 28, 2016 11:30 PM EDT Reads: 3,975
According to Forrester Research, every business will become either a digital predator or digital prey by 2020. To avoid demise, organizations must rapidly create new sources of value in their end-to-end customer experiences. True digital predators also must break down information and process silos and extend digital transformation initiatives to empower employees with the digital resources needed to win, serve, and retain customers.
Sep. 28, 2016 09:15 PM EDT Reads: 381
In this strange new world where more and more power is drawn from business technology, companies are effectively straddling two paths on the road to innovation and transformation into digital enterprises. The first path is the heritage trail – with “legacy” technology forming the background. Here, extant technologies are transformed by core IT teams to provide more API-driven approaches. Legacy systems can restrict companies that are transitioning into digital enterprises. To truly become a lea...
Sep. 28, 2016 08:15 PM EDT Reads: 373